Note: uploaded 2-24-26, Rev2
This is a clip on Grizzly bar setup for the current Swash Box, this will probably work best for dry material. Dimensions are roughly 6”L x 8”W x 5 1/2”H (with a 1/2” gap between the bars). If you print it with the grizzly bars down on to the “build plate” no supports are needed.
Recommend: Print out of PET-G or ABS/ASA minimum 4 wall thickness and min 15% infill
Note: uploaded 2-24-26, Rev2
This is a clip on Grizzly bar setup for the current Swash Box, this will probably work best for dry material. Dimensions are roughly 6”L x 8”W x 5 1/2”H (with a 1/2” gap between the bars). If you print it with the grizzly bars down on to the “build plate” no supports are needed.
Recommend: Print out of PET-G or ABS/ASA minimum 4 wall thickness and min 15% infill
