bildge pump filter2.mp4[2026-01-03 12-42-52.365].jpg
bildge pump filter2.mp4[2026-01-03 12-43-15.717].jpg
bildge pump filter2.mp4[2026-01-03 12-42-45.910].jpg
bildge pump filter2.mp4[2026-01-03 12-42-52.365].jpg
bildge pump filter2.mp4[2026-01-03 12-43-15.717].jpg
bildge pump filter2.mp4[2026-01-03 12-42-45.910].jpg

Larger Bilge Pump Guard STL File only! (click on image for info)

$5.00

This is a larger 12v bilge pump guard/filter that can run a “sock style mesh filter on it” that I designed for a standard size 500 gph and 750 gph pumps. It might fit the larger pumps if they have the same diameter size “body” but I can’t guarantee that.

Note: for best printing make sure to print it with the “pump opening” side down on the print bed. The top with the words is radiused inside so no supports are needed there, but the “locking tabs” near the pump opening at the bottom will need a few small supports.

This is a larger 12v bilge pump guard/filter that can run a “sock style mesh filter on it” that I designed for a standard size 500 gph and 750 gph pumps. It might fit the larger pumps if they have the same diameter size “body” but I can’t guarantee that.

Note: for best printing make sure to print it with the “pump opening” side down on the print bed. The top with the words is radiused inside so no supports are needed there, but the “locking tabs” near the pump opening at the bottom will need a few small supports.