This is the latest STL file for the Gold Gambler Mats (plus the end mat with last riffle) that you have been seeing me using in my videos, so you can print out your own.
This can be printed out of hard plastic like PETG but I had issues with sand getting into the seams and sides making them very hard to get out of the sluice. If you can, printing them out of rubber filament (TPU 95a) solved the issue and would be recommended.
Recommend: 5 layer wall/top/bottom thickness min with 20% infill min for both TPU or PETG filaments (FYI-the thicker wall layers prevent water from seeping inside into the infill area over time)
This is the latest STL file for the Gold Gambler Mats (plus the end mat with last riffle) that you have been seeing me using in my videos, so you can print out your own.
This can be printed out of hard plastic like PETG but I had issues with sand getting into the seams and sides making them very hard to get out of the sluice. If you can, printing them out of rubber filament (TPU 95a) solved the issue and would be recommended.
Recommend: 5 layer wall/top/bottom thickness min with 20% infill min for both TPU or PETG filaments (FYI-the thicker wall layers prevent water from seeping inside into the infill area over time)
![20260409_154409.mp4[2026-04-13 08-22-39.660].jpg](https://images.squarespace-cdn.com/content/v1/65a56839b63149536bc07420/69d1ce6e-037a-4852-90cb-01723418f330/20260409_154409.mp4%5B2026-04-13+08-22-39.660%5D.jpg)
